SMC Networks TigerSwitch - Manual (Page 438)

C
OMMAND
L
INE
I
NTERFACE
4-196
Example
show spanning-tree
This command shows the configuration for the spanning tree.
Syntax
show spanning-tree [interface]
• interface
- ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
- port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use the show spanning-tree command with no parameters to
display the spanning tree configuration for the switch and for every
interface in the tree.
• Use the show spanning-tree interface command to display the
spanning tree configuration for a specific interface.
• For a description of the items displayed under “Spanning-tree
information,” see “Configuring Global Settings” on page 4 -131. For
a description of the items displayed for specific interfaces, see
“Displaying Interface Settings” on page 4 -135.
Console#spanning-tree protocol-migration ethernet 1/5
Console#