Samsung Byline SCH-R310 - Manual (Page 24)

21
Call Waiting
If you’re on a call, your phone beeps when another call is
incoming. Contact your Wireless Carrier for availability.
1. Press to connect and ask the calling party to
remain on the line.
2. Press and the second caller is placed on hold and
you’re returned to the original caller.
3. Press to alternate between calls.
Caller ID
Caller ID lets you identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also appears. If you’ve assigned a
picture to the entry, it appears in the display as well.
Call Block
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
1. In standby mode, enter , , .
2. Enter the number you wish to call, then press .
Silence an Incoming Ring
ᮣ During an incoming call, press the Volume key
(
) on the left side of the phone up or down to
silence the ringer.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
ᮣ During an incoming call, press the Ignore soft key. The
incoming call is forwarded to Voicemail.
In-Use Menu
You can access a number of menus and features even while in a
call.
1. While in a call, press the Mute / Unmute soft key to
disable/enable the microphone.
2. While in a call, press the Options soft key.
The following options appear in the display:
• Speaker On / Off — Enables/disables Speakerphone mode.
• Message — Display the Messages menu.
• Contacts — Display the Contacts menu.
• Recent Calls — View your recent calls log.
• Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
• Location — Turn your GPS location on or set GPS location for
emergency calls only.