Samsung SRP-500 - Manual (Page 8)

7
1-4. Installing or replacing paper roll
CAUTION
Notice the caution label and do not touch the auto cutter blade when
you open rear cover.
1) To prevent data loss, make sure that the printer is not receiving data.
2) Open the rear cover by pressing the open button and push the arrow mark
back.
8
3) Remove the used
paper roll core if
there is one.
4) Insert the paper roll
as shown.
5) Be sure to note the
correct direction that
the paper should
come off the paper
roll.
6) Pull out small amount
of paper as shown.
Then close the cover
and tear off the extra
paper by pulling it
toward the front of
the printer.