Samsung SRP-500 User Manual
Page 30

51
ESC R n
[Name]
Select an international character set
[Format]
ASCII
ESC
R
n
Hex
1B
52
n
Decimal 27
82
n
[Range]
0 ≤ n ≤ 10
[Description]
Selects an international character set n from the following
table:
n Character
set
0 U.S.A
1 France
2 Germany
3 U.K.
4 Denmark
I
5 Sweden
6 Italy
7 Spain
I
8 ---
9 Norway
10 Denmark
II
[Default]
n = 0
ESC U n
[Name]
Turn unidirectional printing mode on/off
[Format]
ASCII
ESC
U
n
Hex
1B
55
n
Decimal 27
85
n
[Range]
0 ≤ n ≤ 255
[Description]
Turns unidirectional printing mode on or off
• When the LSB of n is 1, turn on unidirectional printing mode.
[Notes]
• Only the lowest bit of n is enabled.
• To avoid horizontal printing misalignment, unidirectional printing mode
should be used.
[Default]
n = 0
52
ESC a n
[Name]
Select justification
[Format]
ASCII
ESC
a
n
Hex
1B
61
n
Decimal 27
97
n
[Range]
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description]
Aligns all the data in one line to the specified position.
n selects the type of justification as follows:
n Justification
0, 48
Left justification
1, 49
Centering
2, 50
Right justification
[Notes]
• The command is enabled only when input at the beginning of the line.
• A portion of data skipped by means of HT is also target data for the
justification function.
[Default]
n = 0
[Example]
Left
justification
Centering
Right
justification
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABCC
ABCDC
ABCDEC