Siemens OPTIPOINT 500 User Manual
Page 75
P31003-E8400-A100-3-7620
Service Manual
7-11
Nur für den internen Gebrauch
IP Adapter
Administration Via the Web Browser
8.
Click “IP address and routing” and enter the following addresses:
IP address and subnet mask of OIP-2, the IP address of the IP partner --> HG1500 V1.0
(Xpress
@
LAN) or optiPoint IPadapter in "peer-to-peer" mode)
You also have the option of entering additional routing information. If the file server for upload-
ing/downloading, the OIP-2 and the IP partner are located in different subnets and therefore
cannot be addressed via a single subnet mask, this additional IP routing gateway must be en-
tered.
IP address and routing
DHCP
10.144.233.62
IP address:
WARNING -
Changing any of these parameters will require to
subsequently restart the terminal to activate the new values
Return to
Administrator settings Home
255.0.0.0
Subnet mask:
Submit
IP Routing:
Reset
0.0.0.0
Route 2:
0.0.0.0
Gateway 2:
255.0.0.0
Mask 2:
0.0.0.0
Route 1:
0.0.0.0
Gateway 1:
255.0.0.0
Mask 1:
0.0.0.0
IP partner address:
0.0.0.0
Default gateway: