Siemens OPTIPOINT 500 User Manual
Page 103
P31003-E8400-A100-3-7620
Service Manual
7-39
Nur für den internen Gebrauch
IP Adapter
Configuration Examples
●
Configuring the optiPoint IPadapter on the optiset E.
The same procedure is adopted for the configuration of optiPoint IPadapter on the optiPoint
500 (phone-side) except that in each case, the other IP address is entered as the IP address
and IP partner address.
>
When you restart the computer, the IPadapter is set to "phone-side" by default as on
optiset E.
The IPadapter connected to the U
P0
port should only be switched to "system-side"
mode using the WEB interface after configuration has been completed. The IPadapt-
er resets itself after switching to "system-side" mode.
The IPadapter which is set to "system-side" mode can then only be administrated via
the Web browser and not via an optiPoint system telephone.
- HIPATH 5000 (72 pages)
- Gigaset S450IP (44 pages)
- HIPATH 40 (258 pages)
- 300 Series (197 pages)
- GIGASET A58H (36 pages)
- 420 S (10 pages)
- 70isdn (118 pages)
- HIPATH 1190 (127 pages)
- optiPoint 400 (119 pages)
- HIPATH 3000 (72 pages)
- Giga 3000 (28 pages)
- CX253isdn (161 pages)
- HiPath 5000 RSM (62 pages)
- Hicom 300 H (106 pages)
- HIPATH 2000 (139 pages)
- C450 IP (39 pages)
- HIPATH 8000 (205 pages)
- HIPATH 8000 (249 pages)
- OPENSTAGE 60 (297 pages)
- HiPath 4000 (109 pages)
- HiPath 4000 (110 pages)
- HiPath 4000 (51 pages)
- OPENSTAGE 20 2000 (130 pages)
- 300 H (101 pages)
- OptiPoint 410 (108 pages)
- 300Series (170 pages)
- Gigaset M49AM (26 pages)
- HIPATH 8000 OPTIPOINT420 (242 pages)
- Gigaset S450 (58 pages)
- A30853 (62 pages)
- OPTIPOINT 500 (4 pages)
- Gigaset S45 (29 pages)
- 5000 RSM (125 pages)
- HIPATH V1.2.33 (92 pages)
- 3035isdn (94 pages)
- optiPoint family (39 pages)
- GigasetS44 (36 pages)
- 2010 (26 pages)
- Gigaset DE380 IP R (91 pages)
- Gigaset C450IP (106 pages)
- 30ISDN (62 pages)
- HICOM 300 (26 pages)
- C450 (33 pages)
- Hicom 118 (32 pages)