Siemens OPTIPOINT 500 - Manual (Page 70)

IP Adapter Nur für den internen Gebrauch
P31003-E8400-A100-3-7620
7-6 Service Manual
Administration Via the Web Browser
Fault signaling:
Depending on the type of fault, an error message describing the fault that occurred appears
when an incorrect entry is made in the web page (see the following example).
Error example:
An incorrect phone number ("123abc") was entered.
The following error message may appear on every web page in which parameters can be
changed. The administrator is informed if no parameters can be modified.
> Note:
The configuration data entered (IP address) is retained by the IPadapter even:
● if the connection to the LAN is cleared down
● if the optiset E local power supply crashes
● if the U
P0/E
telephone is disconnected
The IPadapter/U
P0/E
telephone automatically goes back into operation as soon as
LAN crashes/malfunctions are repaired.
The IPadapter is ready for operation as soon as it is plugged back in or relocated on
the LAN; no additional administration/configuration is required.
The login procedure with password entry and authentication is performed by an en-
cryption algorithm to guarantee LAN security.
The local power supply unit required for operation is identical to the 3 power supply
units supplied for the optiset E telephones (FRG/IM; UK and US).
CorNet TC parameters
Submit Reset
Return to Administrator settings Home
Phone number:
123456 CorNet TC login password:
(optional)
WARNING -
Changing any of these parameters will require to
subsequently restart the terminal to activate the new values
phone-side Operation mode:
Options are:
y phone-side
y system-side
The submitted data contained an error:
y Invalid Phone number: 123abc