Siemens OPTIPOINT 500 - Manual (Page 16)

Product Description
P31003-E8400-A100-3-7620
2-2 Service Manual
optiPoint 500 Features at Hicom/HiPath
2.1 optiPoint 500 Features at Hicom/HiPath
Features when Connecting to Hicom and HiPath
Optiset E IDs for telephones and options must be used when connecting optiPoint500 to one
of the following systems:
● HiPath AllServe 150
●
HiPath 3000
● Hicom 150 E/150 H
● Hicom 150 E/H Office
● Hicom 300 E/300 H
Features
● optiset E/optiPoint 500 mixed mode possible at SLMO.
● optiset E/optiPoint 500 mixed mode possible for host/client configuration with phone adapt-
ers.
● PC connection via integrated USB 1.1 interface (excluding entry) and special USB (client)
cables with right-angle plug.
●
CTI applications based on CallBridge TU for TAPI 2.1 available free of charge on the intra-
net (prerequisite: Windows 98 SE or Windows 2000).
● In optiPoint 500 advance, only 12 of the 19 Hicom/HiPath function keys are configurable.
The remaining function keys can however be assigned destination call numbers via the op-
tiPoint menu.
Additional Features when Connecting optiPoint 500 to HiPath 4000
● Support for the new optiPoint 500 IDs
● Additional ring tones (16 instead of 8)
● Call acceptance/cleardown function for “cordless” headsets
●
Mobile station” for optiPoint signature module
● Busy lamp/door-opener control via a programmable key
● Adjustable display contrast (4 levels)