Siemens OPTIPOINT 500 - Manual (Page 63)

P31003-E8400-A100-3-7620
Service Manual
6-1
CallBridge
CallBridge TU
6 CallBridge
optiPoint 500 basic, standard and advance models are equipped with a USB interface. This
provides a USB 1.1 (client) "plug and play" port on a PC with MS Windows 98SE/2000.
6.1 CallBridge TU
The "Callbridge TU" program is ready for downloading. It sets up the connection from the PC
to optiPoint 500 and offers PC-supported telephony. The telephone user should contact his
system administrator for information on installing this program. This program is not installed by
default by the Siemens technician.
●
Callbridge TU software contains all TSP drivers for CorNet-TS, WS protocol and the TAPI
3.0 interface as the basis for customer-specific applications.
The documentation for CallBridge you can find under following link adress:
http://netinfo2.icn.siemens.de/e_doku/en/index.htm#hcab
> The USB cable (S30267-Z360-A30-*) with right-angle plug is required for connecting
optiPoint 500 to a Windows PC. This cable is not supplied with optiPoint 500.