Silex technology SX-200 - Manual (Page 8)

User’s Guide
Document #40181-420 Rev. A 8
About This User’s Guide
This User’s Guide contains information on system requirements, basic troubleshooting, and instructions
on the following:
ƒ Installing the print server hardware
ƒ Configuring the print server for use on your network
ƒ Windows print queue configuration
ƒ Macintosh print queue configuration
Windows
™
System Requirements
To configure the print server settings (wired and wireless versions) using the provided ExtendView
Utility in Windows, your Windows-based system should include the following components:
ƒ A PC with a 133 MHz or higher processor
ƒ Microsoft Windows operating system
ƒ At least 64 MB of RAM (memory)
ƒ At least 3 MB of free hard disk space to install the software
ƒ A CD-ROM drive (to load the software)
ƒ A PC equipped with a USB version 1.1 or 2.0 port
ƒ An Internet connection (for online product registration)
Other Operating System Requirements
Users can access the configuration settings for the Serial Server through a standard web browser by
entering the IP address the serial server obtains from a DHCP server. If your network does not have
DHCP service, then enter the default static IP address of the Serial Server (192.0.0.192).