User’s guide, Set snmp jetadmin, Set snmp setcomm1 – Silex technology SX-200 User Manual
Page 51: Set snmp setcomm2, Set snmp contact, Set snmp location, Sh serial

User’s Guide
Document #40182-420 Rev. A
51
Get Community Name
SET SNMP GETCOMM
(default = “public”)
SET SNMP JETADmin
Enable or disable JetAdmin compatibility
SET SNMP JETADmin [ ENable | DIsable]
(default = enabled)
SET SNMP SETCOMM1
Set Community 1 Name
SET SNMP SETCOMM1
(default = “internal?”)
SET SNMP SETCOMM2
Set Community 2 Name
SET SNMP SETCOMM2
(default = “pass”)
SET SNMP CONtact
Set system contact string
SET SNMP CONtact
(default =
SET SNMP LOCation
Set the system location string
SET SNMP LOCation
(default =
SH SERIAL
Displays the serial number of the unit
sample output:
Serial number is 9047595