Silex technology SX-200 - Manual (Page 77)

User’s Guide
Document #40182-420 Rev. A 77
SET NW APDEN [LOW | MED | HI]
(default = LOW)
SH NW APDEN
Shows the access point density
sample output:
AP Density = Low
SH NW STATS
Show the network I/O statistics
sample output:
WiFi statistics:
TX Unicast frames: 0
TX Multicast frames: 0
TX Fragments: 0
TX Unicast octets: 0
TX Multicast octets: 0
TX Deferred: 0
TX Single retry frames: 0
TX Multiple retry frames: 0
TX Retry limit exceeded: 0
TX Discards: 0
RX Unicast frames: 0
RX Multicast frames: 0
RX Fragments: 0
RX Unicast octets: 0
RX Multicast octets: 0
RX FCS errors: 0
RX Discards no buffer: 0
TX Discards wrong SA: 0
RX Discards WEP undecr: 0
RX Msg in msg fragments: 0
RX Msg in Bad msg fragments: 0
SET NW CERTCN
Sets EAP Common Name
SET NW CERTCN
User defined (default=)
SH NW CERTCN
Shows the value of the first common name check string
sample output:
Common name 1
Note: the default for this string is a null (blank) string
Note: The deprecated command SH NW TTCN will also return this information.
SET NW CERTCN2