Silex technology SX-200 - Manual (Page 75)

User’s Guide
Document #40182-420 Rev. A 75
SET NW CHannel n
n = 1-11 (default = 11, this value is ignored in Infrastructure mode)
SET NW ENC
Sets WLAN Encryption Mode. Supported modes are none, 64 bit WEP, 128 bit WEP, WPA (TKIP), and
WPA2 (AES/CCMP).
SET NW ENC [DIsable | 64 | 128 | WPA | WPA2 ]
(default = Disable)
SH NW ENC
Shows the wireless encryption mode
sample output:
encryption is Disabled
SET NW KEY#
Selects WLAN WEP key entry
SET NW KEY# n
n = 1-4 (default = 1)
SET NW KEYVAL
Sets the currently selected WLAN WEP key entry to the hex value given.
SET NW KEYVAL
key=10 or 26 hex characters (default=)
SET NW MOde
Sets WLAN mode
SET NW MOde
[Infrastructure | Ad-Hoc] (default = Infra)
SH NW MODE
Shows the wireless operating mode
sample output:
Wifi mode = AD-HOC (802.11)
SH NW RADio
Shows the selected radio mode of operation
sample output:
Radio mode is 802.11b
SET NW SPeed
Sets maximum WLAN speed