Silex technology SX-200 - Manual (Page 54)

User’s Guide
Document #40182-420 Rev. A 54
Set filter 1 (text replacement filter) match string index. If the index is zero, the default string of (line feed) is
used.
SET SERVI FRM nn
(default = 0 )
SET SERVI FRS
Set filter 1 (text replacement filter) replace string index. If the index is zero, the default string of (carriage
return-line feed) is used.
SET SERVI FRS nn
(default = 0 )
SET SERVI IP
Enable or disable all IP based jobs (lpd, raw tcp, ftp, etc.) on the service.
SET SERVI IP [ENable | DIsable]
(default = enabled for service 1 and 2, disabled for all others)
SET SERVI NAme
Change the service name
SET SERVI NAme
(default varies by service)
SET SERVI POrt
Set the output port associated with a service.
SET SERVI POrt
(default = “S1”)
SET SERVI PRIority
Set priority for service if multiple service try to transmit data at the same time. Higher priority services are serviced
first.
SET SERVI PRIority nn
(default = 10)
SH SERVI PRI [service_num]
This shows the priority of a specific service. If service_num is not provided, the priority of all services is listed.