Using pricom in netware, Users manual sx, Using nds mode -11 – Silex technology Mini Print Server PRICOM SX-300U User Manual

Page 99: Printing mode -19, Print server mode -19 remote printer mode -20

Text mode
Original mode

6-1

Using PRICOM in NetWare

Users Manual SX

This chapter explains how to configure PRICOM and NetWare server to print from a NetWare
environment.

-For how to connect to PRICOM to printer, Refer to chapter 2.
-Make sure the Novell client software has already been installed on the client and
NetWare server is on the network.
-Make sure to install printer driver before you start using PRICOM.

-NetWare server can be configured by either silex configuration utility (Quick Setup or
AdminManager) or Novell utility, PCONSOLE.
-When configuring by AdminManager, refer to Chapter 8.

In case of initial installation and printing In case of printing
(Administrator) (Client)

Configure printer port

Configure using Quick Setup

Configure printer port

NOTE

TIP

6. Using PRICOM in NetWare