Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 104)

6-6 Using PRICOM in NetWare
Users Manual SX
7. Configure NetWare.
.
8. Select the operation mode of the NetWare server.
9. Select the file server to create a print queue.
.
-The next screen to be displayed vary depending on NetWare server selected.
NetWare 3 or below will go to ->10 (A)
NetWare 4 or above will go to ->10 (B)
-When NetWare 4 or above file server is selected, print server mode will be automatically selected.
Click Next.
Click Next.
Click Next.
Select the file server.
Select Bindery mode.
Click Yes.
TIP