Configuring ip address by rarp, Users manual sx – Silex technology Mini Print Server PRICOM SX-300U User Manual

Page 72

Text mode
Original mode

5-3

Using PRICOM in UNIX/Linux Environment

Users Manual SX

Add the combination of IP address and Ethernet address to be used by the PRICOM in UNIX
/etc/ethers and activate RARPD. IP address will be configured on PRICOM by turning the
power on.

-To configure IP address by RARP, you need a workstation that is running within the network.

The below shows an example of IP address configuration by UNIX RARP server.

Example: Ethernet address is “00809200110f”, IP address is “192.168.10.100” and host
name is “pbox”.

1. Add following configuration to /etc/ethers.

00:80:92:00:11:0f 192.168.10.100 #pbox

2. Reboot RARPD.

rarpd -a

3. Reset PRICOM and printer.

TIP

Configuring IP Address by RARP