Sony 300 - Manual (Page 56)

56
This is used to protect specific shots from accidental erasing (LOCK).
It also releases images that have been previously protected (UNLOCK).
Protect indicator
The unprotected image does not have indicator.
Setting up the play back function using the LCD monitor
1. Rotate the mode dial to the PLAY mode and
press the MENU button.
2. Press the UP( )/ DOWN ( ) button and select
[PROTECT].
3. Press the SET( ) button and the sub menu will
display.
4. Select [LOCK] or [UNLOCK] by pressing the
UP( )/ DOWN ( ) button and press the
SET( ) button.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the protect function.
5. When you protect an image, the protect indicator
will display on the LCD monitor.
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
NOTICE
PLAY
PROTECT
LOCK
UNLOCK
EXIT:MENU SET:
PLAY
DELETE
SLIDE SHOW 2 SEC
PROTECT UNLOCK
# OF PRINTS X1
EXIT:MENU CHANGE:
Protect