Sony 300 - Manual (Page 46)

46
Starting the Play Mode
The PLAY mode functions are listed below
Camera button
Play back
Image deletion, Delete all, Format
Slide show, Protect image
Number of prints
Thumbnail, Digital zoom, Image information display
Print setting
LCD monitor
If there are no images stored on the internal memory or SD memory card, a [NO IMAGE!]
message will display on the LCD monitor.
NOTICE
If the CARD is inserted in the camera, all the camera functions are applied only to the
CARD.
If the CARD is not inserted in the camera, all the camera functions are applied only to the
internal memory.
The last image stored on the internal memory will be displayed on the LCD monitor.
If the SD memory card is inserted, the last image stored on the SD card will be displayed.
The LCD monitor will remain in operation until the camera is switched off in PLAY mode.
INFORMATION
Playing back a movie clip
Steps from 1-3 are the same as those to play back a
still image.
4. Select the movie clip that you want to play back by
using the UP( ) / DOWN( ) button. If you select a
movie clip file, the movie clip indicator( ) will be
displayed on the LCD monitor.
5. Press the SET( ) button to play back a movie clip
- To pause playing back a movie clip, press the
SET( ) button again.
- To stop play back, press the MENU button.
- Press the UP(
)/ DOWN( ) button and other
images will play back.