Sony 300 - Manual (Page 29)

READY
29
Instructions on how to use the memory card
If there is no card, the SD memory card indicator will not be displayed in the LCD monitor.
If there is insufficient memory available:
- If you press the shutter button for the shot, the following message is displayed and
the camera will not operate.
- To optimize the amount of memory in the camera, replace the CARD or delete
unnecessary images stored on the memory.
INFORMATION
MEMORY FULL!
If you open the memory card cover when the camera power is turned on, the power will
turn off automatically.
Don’t remove the memory card when the camera status LED(Green) is blinking as this
may cause damage to data in the memory card.
NOTICE