JVC GR-PD1 - Manual (Page 40)

40
EN
Master Page: Left
SYSTEM
Each setting is linked with “s”, which appears
when the Power Switch is set to “M”. (
੬ pg. 33) The
parameters are the same as in the description on
page 36.
BEEP
(Factory-preset: OFF)
OFF / BEEP / MELODY
TALLY (Factory-preset: ON)
OFF / ON
REMOTE (Factory-preset: ON)
OFF / ON
PRIORITY (Factory-preset: LCD)
LCD / FINDER / BOTH
Y/Pb/Pr (Factory-preset: 576/50P)
576/50P / 576/50i
S/VIDEO (Factory-preset: 4:3 TV)
16:9 TV / 4:3 TV
i.LINK OUT (Factory-preset: SW)
SW / AUTO
CAM RESET
EXECUTE / RETURN
VIDEO DISPLAY
The parameters (except “OFF” in ON SCREEN
settings) are the same as in the description on
page 37.
Brightness adjustment of the display
BRIGHT
For details, refer to “Brightness Adjustment Of The
Display” (
੬ pg. 13).
ON SCREEN (Factory-preset: LCD)
OFF / LCD / LCD/TV
When set to “OFF”, the camcorder’s display
disappears.
DATE/TIME (Factory-preset: OFF)
OFF / AUTO / ON
When set to “AUTO”, the date/time are displayed
in the following cases:
• When playback starts. The camcorder displays
the date/time when scenes are recorded.
• When the date is changed during playback.
TIME CODE (Factory-preset: OFF)
OFF / ON
NOTE:
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote control
(provided). (
੬ pg. 25, 52, 61)
System Menu
Display Menu
DV 2 b i t / DV NARR . 1 4
L
12 : 34 : 24
7
3 0 . . 2 1
1 : 0
3
5 2
ON SCREEN Setting:
For playback mode,
playback sound, tape
speed and tape running
during video playback.
DATE/TIME Setting:
For date/time.
TIME CODE Setting:
For time code.
* 25 frames = 1 second
Minutes
Frames*
Seconds
Display
PLAYBACK MENUS (cont.)
GR-PD1PAL_07Advanced.fm Page 40 Thursday, June 19, 2003 2:28 PM