Samsung D371W(i) - Manual (Page 60)

60 60
ENGLISH
Playback
Playing Back a Tape on the LCD Screen
✤ The Playback function and speaker works only in mode. ➥ page 19
✤ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
3. Insert the tape you wish to view. ➥ page 32
4. Open the LCD Screen.
■ Adjust the angle of the LCD Screen and set the
brightness or colour if necessary.
5. Press the [ œ œœ œ (REW)] button to rewind the tape to the
starting point.
■ To stop rewinding, press the [ ■ (STOP)] button.
■ The Camcorder stops automatically after rewinding is
completed.
6. Press the [ √ √ ❙❙ (PLAY/STILL)] button to start playback.
■ You can view the picture you recorded on the LCD
Screen.
■ To stop the play operation, press the [ ■ (STOP)]
button.
Adjusting the LCD Bright/LCD Colour during
Playback
✤ You can adjust the LCD Bright/LCD Colour during
playback.
✤ The adjustment method is the same procedure as used
in mode.
➥ page 29
Adjusting the Volume
✤ When you use the LCD Screen for playback, you can
hear recorded sound from the built-in Speaker.
-
Take the following steps to lower the volume or mute
the sound while playing a tape on the Camcorder.
✤ When sound is heard once the tape is in play, use the
[
… … / † † ] button to adjust the volume.
■ A volume level display will appear on the LCD
Screen.
■ Levels may be adjusted from anywhere between
<00> to <19>.
■ If you close the LCD Screen while playing, you will not hear sound from
the speaker.
✤ When the Audio/Video cable is connected to the Camcorder, you cannot
hear sound from the Built-In Speaker and cannot adjust the volume.
LCD
✤ 0 ➥ 19
✤ LCD 0
1. [Power] [PLAYER] 0
2. [Mode] [TAPE] 0
( VP-D375W(i)/D975W(i))
3. 0 ➥ 32
4. LCD 0
■ LCD
0
5. [ œ œœ œ (REW)] 0
■ [ ■ (STOP)] 0
■ 0
6. [ √ √❙❙ (PLAY/STILL)] / 0
■ LCD 0
■ [ ■ (STOP)]
0
LCD /LCD
✤ LCD /LCD 0
✤ 0
➥ 29
✤ LCD
0
-
0
✤ [ … … / † † ]
0
■ LCD 0
■ <00> <19> 0
■ LCD 0
✤
0
5 6
60min
0:46:00:11 SP √
[05]