Samsung D371W(i) - Manual (Page 19)

ENGLISH
19 19
Preparation
Connecting a Power Source
About the Operating Modes
✤ There are two types of power source that can be connected to your
Camcorder.
- The AC Power Adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the
Camcorder without having to worry about the
battery power. You can keep the Battery Pack
attached; the battery power will not be
consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E9
TYPE) to a wall socket.
■ The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack of the Camcorder.
4. Set the Camcorder to each mode by holding down the tab on the
[Power] switch and turning it to the [CAMERA] or [PLAYER] mode.
✤ The operating modes are determined by the position of the [Power]
switch and the [Mode] switch.
✤ Set the Operation Mode by adjusting [Power] switch and [Mode]
switch before operating any functions.
✤ M.Cam Mode : Memory Camera Mode / M.Player Mode : Memory
Player Mode
✤ The and the are only enabled on
VP-D375W(i)/D975W(i).
Mode Name
[Power]
Switch
[Mode]
Switch
(VP-D375W(i)/
D975W(i) only)
✤ 0
- 0
- 0
0
0
1. [Power] [OFF] 0
2. AA-E9
0
■
0
3.
0
4. [Power]
[CAMERA] [PLAYER] 0
✤ [Power] [Mode] 0
✤ [Power] [Mode]
0
✤ M.Cam / M.Player
✤ M.Cam Mode M.Player Mode VP-D375W(i)/D975W(i)
0
Power Switch
[Power]
[Mode]
VP-
D375W(i)/
D975W(i)