Samsung D371W(i) - Manual (Page 15)

ENGLISH
15 15
Preparation
Lithium Battery Installation
Lithium Battery Installation for the
Internal Clock
1. Remove the Battery Pack from the rear of
the Camcorder.
2. Open the Lithium Battery Cover on the
rear of the Camcorder.
3. Position the Lithium Battery in the Lithium
Battery Holder, with the positive ( )
terminal face up.
Be careful not to reverse the polarity of the
Battery.
4. Close the Lithium Battery Cover.
Lithium Battery Installation for the
Remote Control (VP-D375W(i)/
D975W(i) only)
1. Pull out the Lithium Battery Holder toward
the direction of the arrow.
2. Position the Lithium Battery in the Lithium
Battery Holder, with the positive ( )
terminal face up.
3. Reinsert the Lithium Battery Holder.
Precaution regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents
of the memory; even if the Battery Pack or AC Power adapter is
removed.
2. The Lithium Battery for the Camcorder lasts about 6 months under
normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time
indicator will display <00:00 1.JAN.2007> when you set the
to . When this occurs, replace the Lithium Battery
with a new one (type CR2025).
4. There is a danger of explosion if Battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should
a battery be swallowed, consult a doctor immediately.
1. 0
2. 0
3. ( )
0
0
4. 0
VP-D375W(i)/
D975W(i)
1.
0
2. ( )
0
3. 0
1.
0
2.
6 0
3.
/ <00:00 1.JAN.2007> 0
CR2025 0
4. 0
0
0 0 0 0