Sharp UX-B30 - Manual (Page 84)

Caller ID (Requires Subscription to Service)
80
To delete calls from the Caller ID list
If you want to delete a single call from the caller list, press while the call
appears in the display. If you want to delete all calls from the list, hold
down for at least 3 seconds while you are viewing any number in the list.
1
Press once and twice.
2
Press once and once.
3
Press once.
4
Press to store a number.
(To clear a previously stored number, press and go to Step 6.)
5
Enter the number by pressing the number keys (max. 20 digits).
6
Press to store (or clear) the number.
7
Press to return to the date and time display.
START/
SPEICHER
STOP
Priority Call
If you have turned on Caller ID, you can set the machine to make a special
ringing sound when you receive a call from a designated phone number. This
lets you know immediately who is calling without having to look at the display.
To use this function, enter the desired phone number by following the steps
below (only one phone number can be entered).
Display: ENTRY MODE
PRIORITY #
1=SET, 2=CLEAR
OWN NUMBER SET
all.book Page 80 Tuesday, June 1, 2004 4:24 PM