Sharp UX-B30 - Manual (Page 52)

Sending a Fax by Automatic Dialling
48
7
Make the desired changes to the name.
•
Press or to move the cursor to the letter or letters you wish to
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 46). The new letter will replace
the old letter.
•
If you do not wish to change the name, go directly to Step 8.
8
Press .
9
Return to Step 2 to edit or clear another number, or press to return
to the date and time display.
START/
SPEICHER
STOP
Using an auto-dial number
Once you have stored a fax or phone number, you can use it to send a fax or
make a phone call.
1
If you are sending a fax, load the
document(s).
•
If desired, press to set the
resolution and/or contrast.
2
Press (or ) until the name of the other party appears in the
display (if no name was stored, the number will appear).
AUFLÖS./
EMPFANG
READY TO SEND
all.book Page 48 Tuesday, June 1, 2004 4:24 PM