Sharp UX-B30 - Manual (Page 53)

Sending a Fax by Automatic Dialling
49
2. Send
ing
Fa
x
e
s
3
If you are sending a fax, press . Dialling and transmission begins.
•
Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 87).
If you are making a phone call, lift the handset. Dialling begins. (If you
lifted the handset before searching for the number, press to begin
dialling.)
START/
SPEICHER
START/
SPEICHER
Sending a fax by Direct Keypad Dialling
You can also enter a full number with the number keys and then press the
key to begin dialling. You can use this method to dial a full number
when you don't need to speak to the other party before faxing.
START/
SPEICHER
1
Load the document(s).
•
If desired, press to set the
resolution and/or contrast.
AUFLÖS./
EMPFANG
READY TO SEND
all.book Page 49 Tuesday, June 1, 2004 4:24 PM