Loading printing paper – Sharp UX-B30 User Manual
Page 18
Loading Printing Paper
14
Loading Printing Paper
You can load up to 100 sheets of A4-size paper (60 - 80 g/m
2
) in the paper
tray (at room temperature; maximum stack height should not be higher than
the line on the tray).
1
Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.
2
Insert the stack of paper into the tray,
PRINT SIDE UP.
•
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
•
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
•
GENTLY LOAD PAPER INTO THE PAPER TRAY.
•
DO NOT FORCE IT DOWN INTO THE FEED SLOT.
Note: Do not use paper that has already been printed on, or paper that is curled.
The stack
should not
be higher
than this line
all.book Page 14 Tuesday, June 1, 2004 4:24 PM