Sharp UX-B30 - Manual (Page 49)

Sending a Fax by Automatic Dialling
45
2. Send
ing
Fa
x
e
s
2
Press once.
3
Enter the fax or phone number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen. Several
pauses can be entered in a row.
•
If you are on a Flash-type PBX and are storing a number for an outside line,
press , press to insert a pause, and then enter the fax or voice
number. (When you dial the auto-dial number, you will automatically dial out
without the need to press the key.)
•
If you are on a PBX that requires dialing a number to dial out and are
storing a number for an outside line, enter the number, press to insert
a pause, and then enter the number of the receiving machine. (When you
dial the auto-dial number, you will automatically dial out without the need to
dial the number for an outside line.)
4
Press .
R
R
START/
SPEICHER
ENTER FAX #
all.book Page 45 Tuesday, June 1, 2004 4:24 PM