Sharp UX-B30 - Manual (Page 47)

Sending a Fax by Normal Dialling
43
2. Send
ing
Fa
x
e
s
1
Load the document(s).
•
If desired, press to set the
resolution and/or contrast.
2
Pick up the handset or press .
Listen for the dial tone.
3
Dial the number of the receiving
machine by pressing the number keys.
•
If you are on a Flash-type PBX and are
dialing out, press , wait for the
connection to the outside line, and then
dial the number.
4
Wait for the connection. Depending on the setting of the receiving
machine, you will either hear a fax tone or the other person will answer.
AUFLÖS./
EMPFANG
R
or
Sending a Fax by Normal Dialling
With Normal Dialling, you pick up the handset (or press ) and dial by
pressing the number keys.
♦
If a person answers, you can talk with them through the handset before
sending the fax. (If you pressed , you must pick up the handset to talk.)
♦
Normal Dialling allows you to listen to the line and make sure the other fax
machine is responding.
READY TO SEND
all.book Page 43 Tuesday, June 1, 2004 4:24 PM