Sharp UX-B30 - Manual (Page 44)

Adjusting the Resolution and Contrast
40
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
♦
The default resolution setting is STANDARD and the default contrast setting
is AUTO.
♦
You must adjust the settings each time you don’t want to use the default
settings.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
Contrast settings
STANDARD Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small letters
or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.
AUTO Use AUTO for normal documents.
DARK Use DARK for faint documents.
all.book Page 40 Tuesday, June 1, 2004 4:24 PM