Sharp UX-B30 - Manual (Page 104)

Problems and Solutions
100
Answering machine connection
General problems
Problem Solution
The answering machine
connection does not
operate properly. • Make sure your fax machine's reception mode is set
to A.M.
• Make sure your fax machine's TEL. LINE socket is
connected to the wall socket. Make sure your fax
machine's TEL. SET socket is connected to your
answering machine's telephone line socket (not the
answering machine's extension phone socket).
• Make sure your answering machine's outgoing
message is under 10 seconds.
• Make sure that the Quiet Detect Time setting is set to
three or four seconds (see page 73).
Problem Solution
A loud howling sound
occurs when the speaker
is used. • Feedback (a loud howling sound) may occur if you
replace the handset while the speaker is on. To avoid
feedback, turn off the speaker (press ) before you
replace the handset.
Nothing appears in the
display. • Make sure the power cord is properly plugged into a
power outlet.
• Connect another electrical appliance to the outlet to
see if it has power.
The machine does not
respond when you press
any of its keys. • If a beep sound is not made when you press the keys,
unplug the power cord and then plug it in again
several seconds later.
Automatic document
feeding does not work for
transmission or copying. • Check the size and weight of the document (see
Transmittable Documents on page 37).
all.book Page 100 Tuesday, June 1, 2004 4:24 PM