Siemens SpeedStream 5450 User Manual

Page 48

5450 Four-Port Router User’s Guide

Configuring Advanced Features

Double-click the icon. The Gateway will open another Web page for UPnP functions. Now, NAT
functionality is available. The Gateway will create virtual servers automatically when it detects the
computer running Internet applications that require this configuration.

Now you can configure the Gateway for UPnP. To configure UPnP on the Gateway:

8. Click

Configure the Universal Plug and Play Settings link to display the ”UPnP Configuration”

window:

Select one of the following operating modes to enable or disable UPnP.

• Disable UPnP

Prevents the Gateway from using the UPnP feature to communicate with other devices or your
operating system. Also may be disabled if your operating system does not support UPnP.

• Enable Discovery and Advertisement only (SSDP)

Sends information about new devices (hardware) detected only. No information concerning
software applications or services is transmitted.

• Enable full Internet Gateway Device (IGD) support

Allows the Gateway to communicate freely with computers on the network about new devices,
software applications, and services as needed to ensure they are working with minimal manual
configuration required.

10. Select one of the following control options.

• Enable Access Logging

Logs UPnP transactions to the system log.

• Read Only Mode

Can read configuration information from a device; cannot modify the device configuration.

11. Click

Apply to accept the settings. This displays the UPnP finish window.

12. Click

Reboot.