Send java security command to the module, 3 send java security command to the module – Siemens TC65 User Manual
Page 79
TC65 JAVA User's Guide
Strictly confidential / Released
s
TC65 JAVA User's Guide_V05
Page 79 of 90
26.09.2005
11.4.3
Send Java Security Command to the Module
Use a terminal program.
enter:
at^sjsec
wait for the answer:
CONNECT
JSEC READY: SEND COMMAND ...
Now you can send the binary data of the command (for example: from a file with the binary
data of the command).
The module’s answer depends on the result of the operation.
The read command, at^sjsec
?,
can be used to request the current Java security status.
Read command
AT^SJSEC?
The read command can be used to request the current status of java security.
Response
^SJSEC:
]
0
security mode not active, no information follows
1
security mode active, further information follows
0
the HTTPS connection or Secure Connection is possible if
the server certificate (or certificate chain) is valid
1
the HTTPS Connection or Secure Connection is possible
only if the server certificate is signed by the customer (owner
of root certificate in device)
0
start of Module Exchange Suite is not permitted
1
start of Module Exchange Suite is permitted
Certificate Information:
Issuer:
SerialNumber:
Subject:
Signature
algorithm:
Thumbprint
algoritm:
Thumbprint: