Figure 8: module state 5 figure 9: module state 6, Figure 8: module state 5, Figure 9: module state 6 – Siemens TC65 User Manual

Page 22

TC65 JAVA User's Guide
Strictly confidential / Released

TC65 JAVA User's Guide_V05

Page 22 of 90

26.09.2005

4.4.1.5

State 5: Java Application Active, General Purpose I/O and I2C

The Java application is active, ASC1 is used as System.out and the Java instance of the RS-
232 serial interface is connected to ASC0. The Java application is activated with at^sjra. The
I/O pins are configured with

at^scpin

at^sspi

. Refer to the AT Command Set [3] for AT

command details.

ASC 0

Java access to serial

interface (CommConnection)

Java AT command API

with CSD

AT parser 0

with CSD

Java AT command API

without CSD

AT parser

without CSD

Java AT command API

without CSD

AT parser

without CSD

up to 10 GPIO pins:

ASC 1

System.out

I2C:

Figure 8: Module State 5

4.4.1.6

State 6: Java Application Active, General Purpose I/O and SPI

The Java application is running, ASC0 is used as System.out and the Java instance of the
RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra
(refer to the AT Command Set [3]).

ASC 0

Java access to serial

interface (CommConnection)

Java AT command API

with CSD

AT parser 0

with CSD

Java AT command API

without CSD

AT parser

without CSD

Java AT command API

without CSD

AT parser

without CSD

up to 10 GPIO pins

SPI

ASC 1

System.out

Figure 9: Module State 6