Siemens Java TC65 - Manual (Page 50)

TC65 JAVA User's Guide
Strictly confidential / Released
s
TC65 JAVA User's Guide_V05 Page 50 of 90 26.09.2005
9.4.1 Switch on Autostart
• There is an AT command, at^scfg, for configuring the autostart functionality. Please refer
to the AT Command Set [3].
• Restart the module.
9.4.2 Switch off Autostart
There are two methods for switching off the autostart feature:
• the at^scfg AT command, or
• the “autostart_off.exe” tool (included in the Installation CD software under wtk/bin)
To disable the automatic start of a user application in a module these steps must be carried
out:
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the Autostart_Off program
4. Select the COM-Port
5. Press the “Autostart Off” button