Motorola V51 - Manual (Page 73)

Using the Options Menu 67
Select Phone Line
i Press E . Select the Quick Access feature or after the tone, say the Voice Tag
name.
This option allows you to switch between Line 1 and Line 2 .
A Availability depends on the type and settings of the SIM card, and/or your
subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
i Press E followed by the volume button to either increase or decrease the ringer
volume.
j Ring or Vibrate
i Press E . Select the Quick Access feature or after the tone, say the Voice Tag
name.
This option sets the way your phone alerts you to an incoming call. The options are:
• Ring Only - the phone will ring with the tone specified by the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then ring.
• No Ring or Vibrate - the phone will just display the Call message.
The setting you choose also defines the type of alert for an incoming SMS message and an
Internet service alert (except that if you select Vibrate Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Music Tones
There are different music tones like ‘Hollywood, Jack n Jill, Buzz etc. When selected, your phone
will produce one of these alternative ringer tones.
j Set Ringer Tone 2
This option sets the tone your phone will make when an incoming call is received on Line 2.
A This option will not appear if you do not subscribe to Line 2.
Set Alarm Ringer Tone
This option allows you to turn the alarm ringer tone on or off.
(A5) 07_pg37_82 opt_menu.fm Page 67 Thursday, July 13, 2000 12:58 PM