Savin 3150eDNP User Manual

Page 78

Changing The Settings Of Service Programs

PRINTS/MASTER
COST

The optional key counter usually counts the num-
ber of prints made regardless of the number of
masters used. For accounting purposes, it is possi-
ble for the key counter to be incremented by a val-
ue between 0 and 50 whenever a new master is
used.

Example: The key counter is adjusted to increase
by 20 for each master fed. If 100 copies have been
made and the master is replaced, the key counter
will increase by 120.

Note

❒ Default: 0
❒ Adjustment value: 0 – 50

CLEAR 2 IN 1

By default, when master making is finished in
Combine Copies mode, this mode stays selected
for the next master making.

If you want master making turned off, select “1”.

Note

❒ Default: 0
❒ Adjustable value: 0: No 1: Yes
❒ Even if you select “1” in this mode, Combine

Copies mode is not cleared when the next orig-
inal are set in the optional document feeder.

❒ For details about Combine Copies, See

⇒

P.32

“Combine Copies—Combining 2 Originals Into
One Print”.

PHT BCKGRND COR-
RECT

When you make prints in Photo or Letter/Photo
mode, the background of the prints might become
dirty. You can prevent this using this function.

Note

❒ Default: 0
❒ Adjustment value: 0: No 1: Yes

ORIGINAL

Specifies the image mode at power on.

Note

❒ Default: 0
❒ Adjustment value:

• 0: Letter mode

• 1: Letter/Photo mode

• 2: Photo mode

SP No. Mode

Function