Savin 3150eDNP - Manual (Page 53)

OPERATION
32
1
Combine Copies—Combining 2 Originals
Into One Print
As a default, this function cannot be
used. If you want to use this function,
set “SET COMBINE KEY” to “Yes”.
See “SET COMBINE KEY” in
⇒
P.55
“Service Program Menu”.
You can print 2 separate originals on
a single sheet of paper. The following
tables list the combinations that can
be used when combining two origi-
nals.
Note
❒ The following tables list the combi-
nations that can be used in this
function:
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version
❒ If the master length of the first
original is longer than the maxi-
mum allowable length or shorter
than the minimum allowable
length, Combine Copies mode is
canceled. The following table gives
the maximum and minimum al-
lowable master length.
❒ Master length = actual original
length
×
Enlargement/Reduction
ratio
❒ Any image closer than 5 mm, 0.2"
to the leading edge of the first orig-
inal will not be printed. Also, any
image closer than 4 mm, 0.16" to
the leading edge of the second
original will not be printed. When
the image is too close to the leading
edge, use copies of the originals
with the image shifted at least 5
mm, 0.2" for the first original (4
Original Size
A4
K
B5
K
A5
K
B6
K
A6
K
Pa-
per
Size B4
L
87
% 100
% 122
% 141
% --
A4
L
71
% 82
% 100
% 115
% 141
%
B5
L
61
% 71
% 87
% 100
% 122
%
A5
L
-- -- 71
% 82
% 100
%
GRCOMB0E
2 1 1 2
Original Size
8 1 /
2
"
×
11" K
5 1 /
2
"
×
8 1 /
2
" K
Paper
Size 8 1 /
2
" ×
14" L
77 % 100 %
8 1 /
2
"
×
11" L
65 % 100 %
5 1 /
2
"
×
8 1 /
2
" L
-- 65 %
Minimum Maximum
LG drum
model 91 mm, 3.6" 243 mm,
9.5"
B4 drum
model 91 mm, 3.6" 243 mm,
9.5"