Savin 3150eDNP - Manual (Page 118)

When The Master Eject Indicator ( k) Blinks
97
5
When The Master Eject Indicator (
k)
Blinks
The Master Eject indicator ( k) and the Reset indicator blink when it is time to
empty master eject box or when you need to set the master eject box.
A
Take out the master eject box and remove the used masters.
Note
❒ Spread an old newspaper, then turn the master eject box upside down on
it to remove the used masters. Then, throw away the masters.
B
Re-install the master eject box. Push in the box until it touches the inside
bracket.
TSLH022E
TSLH02GE