Savin 3150eDNP - Manual (Page 32)

Tint Mode—Making Half-tone Prints
11
1
Tint Mode—Making Half-tone Prints
Use the {Tint} key to make half-tone
prints.
A
Press the
{{{{Tint}}}} key to select Tint
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the {{{{Start}}}} key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{Image
Position
} keys (see ⇒
P.8 “Ad-
justing The Print Image Position”)
or the side table fine adjusting
dial (see
⇒
P.8 “Shifting The
Print Image Position To The Right
Or Left”).
E
Enter the number of prints with
the
{{{{Number}}}} keys.
F
Press the
{{{{Print}}}} key.
GRTINT0E
TSLS018N
TSLS012N
TSLS014N