Savin 3150eDNP User Manual

Page 27

OPERATION

Press the

{{{{Proof}}}} key and check

the image density and the image
position of the proof print.

Note

❒ If the image position is not cor-

rect, adjust it using the

{Image

Position

} keys or the fine adjust-

ment dial. See

⇒

P.8 “Adjusting

The Print Image Position”.

❒ If the image density is slightly

dark or light, adjust the image
density using the

{W} or {V}

key. See

⇒

P.10 “Adjusting The

Print Image Density”.

Enter the number of prints re-
quired with the

{{{{Number}}}} keys.

Note

❒ Up to 9999 prints can be entered

at one time.

❒ To change the number entered,

press the

{Clear/Stop} key and

enter the new number.

Press the

{{{{Print}}}} key.

Note

❒ After printing is completed, the

same number of prints is auto-
matically set for the next job.

❒ To stop the machine during the

multi-print run, press the

{Clear/

Stop

} key.

❒ To return the machine to the ini-

tial condition after printing,
press the

{Clear Modes} key.

TSLS013N

TSLS011N

TSLS014N