Savin 3150eDNP User Manual

Page 105

WHAT TO DO IF SOMETHING GOES WRONG

• Originals lighter than 40 g/m

, 10.6 lb (when setting one original at a time)

• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148 mm

105 mm, 5.8"

4.1"

• Originals larger than 257 mm

364 mm, 10.2"

14.4"

• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals

Note

❒ If you use paste-up originals, make sure the pasted parts hold firmly to the

base sheet and press the

{Paste Shadow Erase} key. If the thickness of the paste-

up original is more than 0.1 mm, and the space between the pasted parts is
less than 2 mm, 0.08", a shadow might appear on the prints.

❒ The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead-

ing edge margin is at least 5 mm, 0.2".

❒ a: 5 mm, 0.2"
❒ Do not mix different sizes of originals in the optional document feeder.
❒ Clean the separation roller if it is dirty. (A dirty separation roller might slip

and cause original misfeeds.)

❒ Remove staples or clips of originals. Fan originals that have had staples or

clips removed.

Original