Savin 3150eDNP - Manual (Page 101)

WHAT TO DO IF SOMETHING GOES WRONG
80
5
R CAUTION:
Note
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒ If misfeeds occur repeatedly, contact your service representative.
❖ ❖ ❖ ❖ When the open cover/unit indicator ( M M M M) blinks
❖ ❖ ❖ ❖ When the supply/exchange indicators blink
❖ ❖ ❖ ❖ When other indicators blink
• Be careful not to cut yourself on any sharp edges when you reach
inside the machine to remove misfed sheets of paper or masters.
Monitor Guidance Display and Action Page
M
CLOSE THE COVER
• Close the original table unit.
• Close the front door.
⇒
P.95 “When The Open Cover/Unit In-
dicator (M) Blinks”
CLOSE THE PLOTTER COVER
• Close the right side cover and
the plotter cover.
CLOSE THE ADF COVER
• Close the optional ADF unit.
⇒ P.95 “When The Open Cover/Unit In-
dicator (M) Blinks”
SET THE DRUM COMPLETELY
Monitor Guidance Display and Action Page
B
LOAD MORE PAPER
⇒
P.69 “Loading Paper On The Paper
Feed Table”
j
LOAD NEW INK CARTRIDGE
⇒ P.71 “When The Add Ink Indicator (j)
Blinks”
C
LOAD NEW MASTER ROLL
⇒
P.74 “Master Roll Replacement”
k
EMPTY MASTER EJECT BOX
• Remove the used master.
⇒
P.97 “When The Master Eject Indica-
tor (k) Blinks”
SET THE MASTER EJECT BOX
Monitor Guidance Display and Action Page
u
SET THE KEY COUNTER
⇒
P.98 “When Other Indicators Blink”