Service program mode, Accessing service programs – Savin 3150eDNP User Manual

Page 74

3. SERVICE PROGRAM MODE

Accessing Service Programs

The service programs can be set by
following this procedure.

Reference

For the service program menu, see

⇒

P.55 “Service Program Menu”.

Press the

{{{{Clear Modes}}}} key.

Hold down the

{{{{Clear/Stop}}}} key

for at least 3 seconds.

The SP-mode display appears on
the guidance display.

Note

❒ If you press the wrong key, try

pressing the above keys from
the beginning.

With the

{{{{Number}}}} keys, enter the

desired service program number
(SP No.).

Reference

For the SP No., see

⇒

P.55 “Ser-

vice Program Menu”.

When you want to leave the
service program mode

A Press the {{{{Clear Modes}}}} key.

Reference

If you want to change the set-
tings of a selected service
program, see

⇒

P.54 “Chang-

ing The Settings Of Service
Programs”.

TSLS01UN

TSLS01AN

TSLS011N

TSLS01UN