Savin 3150eDNP - Manual (Page 29)

OPERATION
8
1
Adjusting The Print Image Position
After master making, you can adjust
the print image position to suit your
needs. There are two ways:
❖ ❖ ❖ ❖ Shifting The Image Position Forward
Or Backward
Shift the image position using the
{Image Position} keys.
❖ ❖ ❖ ❖ Shifting The Image Position To The
Right Or Left
Shift the image position using the
side table fine adjusting dial.
Shifting The Print Image
Position Forward Or Backward
* Paper feed direction
A
Press the left {{{{Image Position}}}} key
to move the image forwards, the
right key to move it backwards.
Note
❒ When you shift the image for-
wards, leave a margin (more
than 5 mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
❒ The right or left {Image Position}
keys shift the image about 0.5
mm, 0.02" each time they are
pressed. When the indicator
changes, the image position
shifts about 5 mm, 0.2".
B
Press the
{{{{Proof}}}} key to check the
image position.
Shifting The Print Image
Position To The Right Or Left
* Paper feed direction
GRFORW0E
TSLS015N
TSLS013N
GRLEFT0E