1center/edge erase—erasing center and edge margins – Savin 3150eDNP User Manual
Page 38
Center/Edge Erase—Erasing Center And Edge Margins
17
1
Center/Edge Erase—Erasing Center And
Edge Margins
When printing from thick books, or
similar originals, the binding margin
at the center and the edges might ap-
pear on prints. To prevent this, follow
the steps below.
Note
❒ As a default setting, the paper sizes
and directions that can be used are
as follows:
❒ If you want to use other size origi-
nals, you can register the size using
Service Program mode (See
⇒
P.55
“Service Program Menu”).
❒ The margin width to be erased can
be adjusted with Service Program
mode (See
⇒
P.55 “Service Program
Menu”).
A
Press the
{{{{Center/Edge Erase}}}} key
twice to select the Center/Edge
Erase mode.
Check Indicator
is blinking and
is shown in the guidance dis-
play.
Note
❒ To cancel this mode, press the
{Center/Edge Erase} key again.
B
Press the
{{{{ }}}} or {{{{ }}}} key to se-
lect the paper size and direction.
Metric
version
B4
L, A4L, A5K, A5L,
B5
K, B5L
Inch
version
8
1
/
2
"
×
14"
L, 8
1
/
2
"
×
11"
L,
5
1
/
2
"
×
8
1
/
2
"
L, 5
1
/
2
"
×
8
1
/
2
"
K
GRMARG0E
TSLS01CN
TSLS01DN