Sanyo VCC-WB4000P - Manual (Page 66)

PPP Settings
6
Click the [APPLY] button.
The new settings will be written to the
camera.
7
Click the [OK] button.
The settings will be applied to the network
archiving software.
8
Close the Camset window.
Note:
•
The camera cannot be accessed using
the computer’s web browser while the
camera is connected to the modem. Use
a wired LAN or wireless LAN to access
the camera.
•
Only alarm image data and alarm data
can be transmitted by means of PPP
connections.
B PPP Connection from a
Computer (Dial-in connection)
You can use the Dial-up networking function of a
computer to connect the computer to the camera
via a telephone line. This method does not
involve an Internet Service Provider.
1
Click the [PPP] menu select button.
The PPP SET screen will be displayed.
2
Select “USE” from the “DIAL IN”
drop-down list box and then click the
[DETAIL] button.
The PPP SET (DIAL IN) screen will be
displayed.
Computer
Camera
Modem
Modem
Telephone line
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English – 65 –