Sanyo VCC-WB4000P - Manual (Page 25)

Network Camera (Wired LAN) Settings
Changing the Access Level
If live images are monitored without using a
password, the [SET] button will change to
“CHANGE ID”. To change the access level to
“ID2” or “ID3”, follow the procedure below.
1
Click the [CHANGE ID] button at the
top-right of the live image screen.
The password entry screen will be displayed.
2
Type in the user name and password for
the required user level, and then click the
[OK] button.
(Example: ID3, 3333)
The access level will then change to those for
user level ID3 (Administrator).
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
– 24 – English