Sanyo VCC-WB4000P - Manual (Page 34)

CAMERA Settings
4
Click the [SET] button.
At the same time as the camera images
switch to black & white, an ALARM OUT
(NO/NC) signal will be output and the
connected IR lamp will illuminate.
Note: The IR lamp will illuminate only while
black & white monitoring is being
carried out. Set the polarity so that a
signal is output during black & white
monitoring.
C B/W Mode Settings
Images are monitored in black and white
regardless of the luminance of the objects.
1
Click the [DETAIL] button in the
DAY/NIGHT field and set MODE to “B/W”.
2
Set “AGC Gain” to “+12dB” (example).
If the objects are dark, set the AGC Gain to
the maximum value so that images are made
brighter when they are being monitored.
Available settings: –6dB, 0, +6dB (default
setting), +9dB, +12dB,
+15dB, OFF
3
Click the [SET] button.
Monitoring will switch to black & white
according to the set conditions.
1,2
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English – 33 –